The point of this article is in the rare occasion you may need to add an InstaShow Button, or if you mix and match them (as was done between NBES and MS).
(Full Manual can be found HERE)
| The BenQ WDC10 InstaShow is used in multiple buildings, including the MS Cafeteria The set comes with the items to the left, with the Buttons coming in two flavors:
The set includes:
|
|---|---|
|
2. Grab the information on the screen when you turn on your projector. In the upper right you will find an SSID and IP address 3. Change your SSID to the one that matches your screen The password for the SSID is the exact name of the SSID. For example, if you are connecting to "WDC10_08111D" you will use WDC10_08111D as the password to connect to the PAN. 4. Once connected to the SSID, open Chrome and input the IP Address The default Hub credentials are: Username: admin Password: 0000 (zeros) |
| 5. Click on Paring on the left side menu 6. On the Button, click and hold MODE for 5 seconds, the Button light will change from Red to Blue Blinking
7. While the blue light is blinking, click on Start Pairing in the web interface Note: If you click Start Pairing before holding down Mode, when you do hold it down it will stop the pairing process. 8. Once it pairs, the blue light will turn green (standby) 9. Test it by clicking the green button, which will turn to a solid blue light and project your screen to the projector |
